Logo print

title
title
title
title

Contactor CX³ with front face handle 2 pole - 40A - 250V~ - 2 NO contacts with 24V~ coil - 2 modules

CX³ LEGRAND

Contactor CX³ with front face handle 2 pole - 40A - 250V~ - 2 NO contacts with 24V~ coil - 2 modules

REF. 412515 EAN. 3245064125154
Download product sheet
You can only compare 4 products, you must remove 1 to add this one
Product charateristics
  • Utilization category : AC7a or AC1 - 40A / AC7b or AC3 - 22A
  • Can be equipped with auxiliaries reference 412431
  • Conform to IEC/EN 61095
  • 24V~ coil
  • Handle can be accessed after removing blanking plate.
Recommendation / Restriction
  • This product should be installed in compliance with installation rules, preferably by a qualified electrician. Incorrect installation and/or incorrect use can lead to risk of electric shock or fire. Before carrying out the installation, read the instructions and take account of the product's specific mounting location. Do not open up, dismantle, alter or modify the device except where specifically required to do so by the instructions. All Legrand products must be opened and repaired exclusively by personnel trained and approved by Legrand. Any unauthorised opening or repair completely cancels all liabilities and the rights to replacement and guarantees. Use only Legrand brand accessories.

The product's benefits

Installation
  • Easy integration: fitted with two DIN rail clamps, one top side and one bottom side to ease the clipping.
Usage
  • Equipped with a front face handle to get the possibility to also control it on-site directly on the device itself (test and repair function). Permanent ON or OFF wihout automatic reset.Also Fitted with a label holder allowing a clear, visible and convenient identification of the circuit.

Technical characteristics

Rated operating voltage 250-250 V
Rated operation current 40 A
Rated excitation voltage 20-26 V
Voltage type (operating voltage) AC
Voltage type (excitation voltage) AC
Number of contacts as normally open contact 2
Number of contacts as normally closed contact 0
Max. incandescent lamp load 5000 W
Max. load fluorescent lamp 3100 VA
Max. load fluorescent lamp (Duo circuit) 3400 VA
Max. load fluorescent lamp (parallel compensated) 1400 VA
Slider for hand switch Yes
Width in number of modular spacings 2
Built-in depth 44 mm
Additional equipment possible Yes
Degree of protection (IP) IP2X
Width 68 mm
Height 94 mm
Depth 35.6 mm

Documentation

2 documents
Technical Sheet
F01333EN-01.pdf pdf (0.35 Mo)
Technical Sheet
F01333FR-01.pdf pdf (0.35 Mo)
2 documents
Catalogue Commercial Page
ex223001_0093.pdf pdf (0.28 Mo)
Catalogue Technical Page
ex223001_0095.pdf pdf (0.05 Mo)
1 document
3D Autocad
412545.dwg dwg (0.14 Mo)
3 documents
Agreement
VDE-40034227 (0.4 Mo)
Agreement
NF-NF012_3114 (0.55 Mo)
Agreement
OC / CB-FR_712933 (0.41 Mo)
SELECT AN ACTION